PROBLEM

POSSIBLE CAUSE

SOLUTION

The memory is erased when the ignition is turned off.

The battery wire has not been connected to the proper

Connect the wire correctly, referring to the section on

terminal.

"Connecting Wires to Terminals".

 

 

The ignition and battery wire are incorrectly connected.

Connect the wire correctly, referring to the section on

 

"Connecting Wires to Terminals".

A CD ejects as soon as it is

The CD is upside-down.

Load the CD with the labeled side up.

loaded.

 

 

The CD is quite dirty.

Clean the CD, referring to the section on "Cleaning CDs" (see

 

 

 

p. 5).

 

 

 

The sound skips on a CD.

The CD is scratched or dirty.

Clean the CD, referring to the section on "Cleaning CDs" (see

 

 

p. 5).

 

 

 

A track will not play.

Random play has been selected.

Turn off random play.

 

 

 

The DSP effects are

You are using a two-speaker system.

Use a front/rear four-speaker system.

imperceptible.

 

 

The front and rear output are reversed.

Connect the wire correctly, referring to the section on "Connecting Wires to Terminals".

The + and - of speakers are reversed.

Connect the wire correctly, referring to the section on

 

"Connecting Wires to Terminals".

The fader or balance settings are set all the way to one side.

Reset the fader or balance settings.

— 43 —