Kenwood FS620 manual care and cleaning, service and customer care, descaling

●Stir large amounts half way through cooking.

●Smaller amounts cook faster than larger amounts.

●Similar-sized pieces of food cook evenly.

●Like a conventional oven, you can add food as you go along. If something needs less time, add it later.

●If you lift the lid, steam will escape and cooking will take longer.

●Food will keep cooking when your steamer switches off, so remove it immediately.

●The cooking times on pages 5 - 6 are guides based on using the lower basket. The higher the food is, the slower it cooks. So allow an extra

5 - 10 minutes for food in the next basket above. Check that food is thoroughly cooked before eating.

●If your food's not cooked enough, reset the time. You may need to top up with water.

care and cleaning

●Before cleaning, always switch off, unplug and let everything cool.

●Never put your steamer base in water or let the cord or plug get wet.

cleaning the base

●Wipe with a damp cloth, then dry. all other parts

●Wash in warm soapy water, then dry.

●For storage, stack the baskets one inside the other, starting with the

highest numbered basket and finishing with basket number 1 .

descaling

●The appliance should be de-scaled once a month or after every 30 uses depending upon which comes first.

1Fit the water tank and fill with 200ml of household appliance descaler, then fill the water tank up to the MAX level with water (approximately 800ml).

2Fit the drip tray, one basket and the lid.

3Plug in the appliance, switch on and allow the steamer to operate for 5 minutes.

4Switch off and unplug the appliance and allow to stand overnight.

5Empty and discard the descaling liquid.

6Wash the removable water tank, drip tray, basket and lid in warm soapy water, then dry.

7Refill the water tank with fresh water, refit the parts and allow to run for 5 minutes. Empty and discard any remaining water.

8Wash the water tank, drip tray, basket and lid in warm soapy water.

9The appliance is now ready for use.

service and customer care

●If the cord is damaged it must, for safety reasons, be replaced by Kenwood or an authorised Kenwood repairer.

If you need help with:

●using your steamer

●servicing or repairs

Contact the shop where you bought your steamer.

4