Kenwood KDC-X717 instruction manual Canceling Direct Access Tuning

1Select the band for auto memory entry.

2Press the AME button for at least two seconds to start auto memory entry.

The numbers of the preset station buttons are shown in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

Function of the KDC-X917/KDC-X817/KDC-X717

Direct Access Tuning (Function of remote)

When you know the frequency of the station that you want to listen to, you can input it directly for quick access.

1Select the band by pressing the FM or AM button.

2Press the DIRECT button.

"----" is displayed for 10 seconds.

If you make no input in the 10-second period, direct access tuning is automatically canceled.

3Enter the frequency of the desired station.

If you want to listen to an FM station at 92.1 MHz, for example, press 0, 9, 2, and 1.

If you want to listen to an AM station at 810 kHz, for example, press 0, 8, 1, and 0.

NOTE

•You cannot enter frequencies above or below what a band can receive.

•FM frequencies can only be input in 0.1 MHz steps, and not 0.01 MHz steps.

Canceling Direct Access Tuning:

Press the DIRECT button again.

— 21 —