Adjusting Time Automatically:
Tune to a RDS station and receive the signal for several minutes.
The clock will adjust automatically to the local time.
NOTE
The clock will not adjust automatically if the RDS station tuned to is not transmitting time data. In such a case, try another RDS station.
Selectable Illumination
You can switch the color of the button illumination between green and red.
Display and setting:
"Button Color Green"/"Button Green" :
The color of the illumination is green. "Button Color Red"/"Button Red" :
The color of the illumination is red.
Switching Display Mode
You can select the display mode of this unit.
Display and setting:
"Display Type A" : Divide the display into the upper and lower parts to separately provide different information. (Vertical division display) (page 12) (Default setting)
"Display Type B" : The display will turn on by using only the upper part of the display and clock.
"Display Type C" : Use the entire display to provide a single type of information. (Full screen display) (page 11)
Function of the KDC-X917/KDC-X817/KDC-9017
Icon/Spectrum analyzer Select
This function permits switching of the spectrum analyzer display.
Display and setting:
1Select the display "Icon/Speana Select" during the selecting function in the menu system.
2Pressing the 4 or ¢ button switches the Icon/Spectrum analyzer.
Function of the
Font Select
You can change the font used on the display.
Display and setting:
1Select the display "Font Select" during the selecting function in the menu system.
2Pressing the 4 or ¢ button switches the font on the display.
Function of the KDC-X717
Brightness level adjustment
You can adjust the brightness level of the unit separately when your car's light switch has been turned on or off.
Display and setting: "Bright 0" – "Bright 10"
NOTE
The initial setting value while your car's light switch is turned on is "5" , and while the light is turned off is "10".
— 37 —
