CD/External disc control features
English
Function of the
Direct Disc Search (Function of disc changers with remote)
Using the remote, directly input the disc number that you want to listen to.
1Using the number buttons on the remote, input the number of the disc that you want to listen to.
The selected disc number will blink in the display for 10 seconds.
If you make no further input in the
NOTE
•Input "0" to select disc 10.
•If you input more than two numbers all at once, a search will be made only of the last number input.
•You cannot use the direct disc search function during random play or magazine random play.
2Press either the DISC+ or DISC– button while the number inputted is blinking.
The disc starts playing.
Canceling Direct Disc Search While It Is Operating:
Press the 38 button.
NOTE
•This function can only be used in disc changers that were manufactured or sold as of 1997. Also note that some units cannot provide a display unless the disc name preset has been made by the unit that is playing.
•Discs in the disc changer that have never been played before will appear as "NO ACCESS" when the disc names are displayed. When you cannot identify a disc because of the "NO ACCESS" display after inserting a disc magazine, try playing it to display the disc name. Also note that "NO DISC" will be displayed when a disc has not been loaded.
Rapid display (forward / reverse):
Press the DISC+ or DISC– button.
Pressing the DISC+ button will rapidly display the preset names/disc titles in order.
Pressing the DISC– button will rapidly display the preset names/disc titles in reverse order.
2When the name appears for the disc you want to play Press the OK button.
The disc whose name is displayed will be recalled, and the disc name preset play (DNPP) mode will end.
To cancel DNPP mode: Press the DNPP button.
The disc name preset play (DNPP) mode will be canceled.
Disc Name Preset Play (DNPP)
(Function of Remote)
If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it.
1Press the DNPP button on the remote.
"DNPP" will appear in the display, and the disc name preset play mode is entered.
The names of all the discs in the disc changer will appear successively in the display for five seconds each.
Discs whose names have not been preset will appear as "NO NAME" in the display.
— 32 —
