Kenwood KDC-X717 Loudness, Speaker & Woofer setting, System Q, General features, English

General features

English

Loudness

This function amplifies low and high tones when the volume is turned down.

The LOUD indicator lights up when the loudness function is on.

Turning Loudness On/Off:

Press the LOUD button for at least one second to switch the loudness on and off.

NOTE

The loudness function does not affect non-fading pre-out.

Note that some of these parameters cannot be controlled by the audio control setting feature. (KDC-9017)

Their setting values are different depending on the setting of the speaker and woofer setting mode.

Speaker & Woofer setting

Speaker setting allows the System Q settings to be fine-tuned according to the type of speakers.

Woofer setting allows for Network configuration according to the type of subwoofers.

System Q

You can recall the best audio setting preset for different types of the music.

Switching the Preset Sound Setting:

Each time you press the Q button, the preset sound setting switches as follows:

1Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected.

2Press the Q button to enter the speaker setting mode.

3Each time you press the FM/AM button, the mode switches as follows:

Speaker setting mode

Scan of Flat – Easy (Default setting)

User memory*

Flat

Rock

NOTE

Easy

Jazz

Pops

Top 40

*User memory:

The unit returns to the state adjusted the last time with

the audio control setting feature.

Woofer setting mode (KDC-X917/X817/X717 only)

4•In speaker setting mode

Press either the 4 or ¢ button to select the type of speaker. The setting switches as follows.

Off ("Speaker Setting OFF") /

For 6/6x9 in. speaker (Speaker Setting 6*9/6 inch") / For 5/4 in. speaker ("Speaker Setting 5/4 inch")/

The System Q function changes the values of the following sound quality parameters:

Bass center frequency, bass level, bass quality factor, bass extend, middle center frequency, middle level, middle quality factor, treble center frequency, treble level, non-fading level, high-pass filter frequency for front output, high-pass filter frequency for rear output, and low-pass filter frequency for non- fading output.

For the OEM speaker ("Speaker Setting O.E.M.")

•In woofer setting mode (KDC-X917/X817/X717 only)

Press either the 4 or ¢ button to select the type of Sub woofer. The setting switches as follows.

"Woofer OFF" / "12in type A" / "10in type A" / "12in type B" / "10in type B" / "12in type C" / "10in type C" / "8inch" / "12in type D" / "10in type D"

— 10 —