Kenwood KDC-X717 instruction manual Removing the Unit, Removing the hard rubber frame

Removing the Unit

■ Removing the hard rubber frame

English	Insert the removal tool into the indentations in the hard rubber
	frame, and pull it gently until the lock is released.

Accessory0

Removal tool

■Removing the Unit

1Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.

2Remove the Hex-head screw with integral washer (M4⋅8) on the back panel.

3Insert the two removal tools deeply into the slots on each side, as shown.

Accessory4 Catch facing up

Accessory3

Removal tool

4Push upward the removal

tool toward the top, and pull out the unit halfway whilst pressing towards the inside.

2CAUTION

Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, being

careful not to drop it.

— 46 —