Menu settings
English
Dimmer
You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer wire is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.
Function of the KDC-X917
Built-in Amp Mute Control <In Stand by mode>
Toggles on or off the mute control on the
Display and setting:
"Builtin AMP Mute ON" :
"Builtin AMP Mute OFF" :
setting)
Time setting for removing the faceplate
You can set the interval during which the open control panel cannot reverse to be hidden. During the period you have set, the faceplate can be removed from the faceplate bracket.
Display and setting:
"Off Wait" : 0sec / 3sec (Default setting) / 5sec / 10sec / 15sec / 20sec / 25sec (sec=seconds)
Function of the
System Q
When this system is set to on, the System Q factors (Bass center frequency, Bass quality factor, Bass extend, Middle center frequency, Middle quality factor, and Treble center frequency) appear during the audio control mode.
Display and setting:
"System Q ON" : The System Q factors appear and can be adjusted. (Default setting)
"System Q OFF" : The System Q factors are not appeared.
Dual Zone System <In AUX mode>
The following operation allows separate sound sources to control the output of the front and rear speakers. The Dual zone system can only be switched on or off when the source is set to the AUX mode.
Display and setting:
"Zone 2 ON" : The dual zone system function is on.
"Zone 2 OFF" : The dual zone system function is off. (Default setting)
NOTE
•You must purchase the optional
•You can choose to send the AUX input through the rear channel, and the unit’s tuner or audio source through the front channel.
•The Bass, Middle, Treble and Loudness adjustments do not affect the rear channel.
•When the Dual zone system is turned on, the External disc control features cannot be used.
•When you set the Dual zone system to on while the
— 38 —
