Kenwood KDC-X717 Faceplate Angle Adjustment, Switching Full-ScreenDisplay, Sliding the faceplate

5Press the Q button to end the speaker setting mode and woofer setting mode.

NOTE

•Speaker setting function allows for tuning of bass, middle and treble.

•Woofer setting allows for tuing of high-pass filter frequency, low-pass filter frequency and non-fading level.

Faceplate Angle Adjustment

You can adjust the faceplate angle for easy viewing.

Sliding the faceplate:

Press the ANG button for at least one second.

NOTE

Do not apply excessive force to the faceplate under setting 2.

Switching Full-Screen Display

This function switches the type of information on the display in the full screen display mode.

Each time you press the CLK button, the full screen display changes as follows:

In Source mode:

Demonstration

Spectrum Analyzer 1

Spectrum Analyzer 2

Spectrum Analyzer 3

Spectrum Analyzer 4 (KDC-X917/X817/9017)/

Each source display+ Graphic (KDC-X717)

In Stand by mode:

Demonstration

Date + Clock + Function indicator

"ALL OFF"

NOTE

Please see the menu settings about selecting the display mode. For details refer to the Switching Display Mode page for the menu settings. (page 33)

— 11 —