Kenwood BT948HD, KDC-X995 Items, Display, Display, Overview, Press button, Preset Tuning, Make a setting, 5Make a setting, HD Radio™ Setting, Select “Settings”, Desired frequency

⁄

•This setting can be made when “Type Normal” is selected for the “Tuner Preset Type” of <Initial Settings> (page 38).

Preset Tuning

Recalling the stations in the memory.

1Select the radio band

2Enter Menu List mode Press the [MENU] button.

3Select a desired station in the memory Turn the [VOL] knob and press it when the desired item is displayed.

Select “List & Memory” > Preset number.HD Radio™ Setting

You can select following HD Radio Setting items.

1Select the HD Radio source

2Enter Menu List mode Press the [MENU] button.

3Turn the [VOL] knob and press it when the desired item is displayed.

Select “Settings”.

4Select the setting item to adjust

Turn the [VOL] knob and press it when the desired item is displayed.

Display		Overview
“Settings”
	“Seek Mode”	Selects the tuning mode of the radio.
		“Auto1”: Automatic search for a station.
		“Auto2”: Search in order of the stations in the
		Preset memory.
		“Manual”: Normal manual tuning control.
	“Auto Memory”	Memorizes 18 stations (FM) or 6 stations (AM)
		with good reception automatically.
		Refer to <Auto Memory Entry> (page 22)
	“Receive Mode”	Sets the receive mode of the HD Radio receiver.
		“Auto”: Automatically tunes to analog broadcast
		when there is no digital broadcast.
		“Digital”: Digital broadcasts only.
		“Analog”: Analog broadcasts only.
	“TAG Memory”	Displays the tag memory usage of HD Radio
		receiver. Up to 50 tags can be registered to
		this unit.
		“0”/“50”
	“Tagging”	Turns ON / OFF the tag memory function of
		HD Radio receiver.
		“OFF”/“ON”
		(	: Factory setting)

5Make a setting

Press the [4] or [¢] button.

6Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Function of remote control

Direct Access Tuning

Tuning in a desired radio station by entering the frequency.

1Select the radio band

2Enter Direct Access Tuning mode Press the [DIRECT] button.

“– – – –” is displayed.

3Select Tuning item

Press the [DIRECT] button.

Pressing the [DIRECT] button each time switches the following tuning items as follows.

Items	Display
Frequency	“– – – –”
Channel	“HD –”
Cancelling Direct Access Tuning	­—

4Enter the frequency or Channel Press the number buttons. Example of frequency input:

Desired frequency	Press button
92.1 MHz (FM)	[9], [2], [1]
810 kHz (AM)	[8], [1], [0]

5Tune in to the entered frequency or Channel Press the [4] or [¢] button.Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

English 23