Kenwood BT948HD, KDC-X995 Display, SRC MENU VOL, Make a setting, Basic Operation, 5Make a setting, Select “Settings”, Exit Menu List mode, 5Select the Channel, 6Exit Menu List mode

Satellite Radio Tuner Control (Optional)

SRC MENU VOL Satellite Radio Setting

4 ¢

Basic Operation

Selecting Satellite Radio source

Pressing the [SRC] button repeatedly switches source.

Select the “SIRIUS”, or “XM” display.

⁄

•You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if “CALL … TO SUBSCRIBE” appears.

•The radio may take a little time to start receiving after you select the Satellite Radio source.

•If the signal reception fails, “Acquiring Signal”/ “No Signal” appears.

Selecting the channel

Press the [4] or [¢] button.

Selecting the Preset Band

1.Enter Menu List mode Press the [MENU] button.

2.Turn the [VOL] knob and press it when the desired item is displayed.

Select “SR1”, “SR2”, “SR3” or “SR4”. (SIRIUS) Select “XM1”, “XM2”, “XM3” or “XM4”. (XM)

56KDC-X995/ KDC-BT948HD

You can select following Satellite Radio Setting items.

1Select Satellite Radio source

2Enter Menu List mode Press the [MENU] button.

3Turn the [VOL] knob and press it when the desired item is displayed.

Select “Settings”.

4Select the setting item to adjust

Turn the [VOL] knob and press it when the desired item is displayed.

Display		Selectable setting/item
“Settings”
	“Seek Mode”	Selects the tuning mode of the radio.
		“Channel”: Normal manual seeking control.
		“Preset”: Search in order of the channels in the
		Preset memory
	“ESN”	Displays the Electronic Serial Number of satellite
		radio.
		“ESN=”
		(	: Factory setting)

5Make a setting

Press the [4] or [¢] button.

6Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Category and Channel Search

Selecting the channel and category you want to receive.

1Select Satellite Radio source

2Enter Menu List mode Press the [MENU] button.

3Enter Category and Channel Search mode Turn the [VOL] knob and press it when the desired item is displayed.

Select “Channel Search”.4Select the CategoryTurn the [VOL] knob to select Category, and then press the [VOL] knob.5Select the ChannelTurn the [VOL] knob to select Channel, and then press the [VOL] knob.