Kenwood BT948HD, KDC-X995 Item, Range, Display, Operation, Operation type, Select the source, 1Select the source, Exit Audio Control mode, 5Exit Audio Control mode

Car Type Fine Adjustments

Adjusting fine tuning of the speaker position compensation value specified at <Car Type Selection> (page 44).

Display	Item	Range
“Front”	Front speaker	0 – 14.44 feet
“Rear”	Rear speaker	0 – 14.44 feet
“SW”	Subwoofer	0 – 14.44 feet
		(	: Factory setting)

1Select the source

Pressing the [SRC] button repeatedly switches source.

Select a source other than “STANDBY”.

2Enter Audio Control mode Press the [VOL] knob.

3Enter Car Type Adjustment mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “Detailed Setup” > “Car Type Adjust”.

4Select the item you want to set

Operation type	Operation
Selects the item.	Turn the [VOL] knob.
Adjust each item.	Press the [4] or [¢] button.
Set the value.	Press the [VOL] button.

The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior.

1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior.

2 Measure the distances from the reference point to the speakers.

3 Calculate the distance difference in accordance with the farthest speaker.

Reference point

		+3.2 feet
FRONT		1.7 feet	FRONT
		2.6 feet
REAR			REAR
	4.9 feet	+2.3 feet

+0 feet

SUB-W

5Exit Audio Control mode

Press the [MENU] button for at least 1 second.

English 45