Kenwood BT948HD, KDC-X995 Display, Make a call, Information, 5Make a call, Press the [VOL] knob, 4“PN Type” is displayed, Press the [MENU] button, Select “Voice Recognize”

Make a Voice Dialing Call

1Enter Bluetooth mode Press the [ ] button.

2Select voice recognition mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “Voice Recognize”.3“PB Name?” is displayed.

When a beep is heard, say the name within 2 seconds.

4“PN Type” is displayed.

When a beep is heard, say the category name within 2 seconds.

5Make a call

Press the [VOL] knob.

✍✍This step is the same as step 4 of the procedure in <Calling a Number in the Phone Book> (page 28). You can make a call or select a category.

⁄

•If your voice cannot be recognized, a message is displayed. Pressing the [VOL] knob allows you to retry voice input. Refer to <Troubleshooting Guide> (page 72).

•Both the name and category require registration of a voice tag. Refer to <Setting a Voice Command for Category> (page 53).

•Audio sound is not output during voice recognition.

Registering to the Preset Dial Number List

1Select the phone number you wish to register Select the phone number with reference to the following:

-Calling a Number in the Phone Book (page 28)

-Calling a Number in the Call log (page 28)

-Dial a Number (page 28)

2Enter Preset Memory modePress the [VOL] button for at least 1 second.3Select the Preset number to put in the memory

Turn the [VOL] knob and press it for at least 1 second when the desired item is displayed. Select preset number.

4Determine the Preset number to put in the memory

Turn the [VOL] knob and press it when the desired item is displayed.

Exit the Preset Memory mode

Press the [MENU] button.

Display of Phone Number type (category)

The category items in the Phone Book are displayed as follows:

Display						Information
“GENERAL” / “					”	General
“HOME” / “	”					Home
“OFFICE” / “			”			Office
“MOBILE” / “				”		Mobile
“OTHER” / “		”				Other

English 29