Kenwood BT948HD, KDC-X995 Listening Position Fine Adjustments, ] or, Item, Display, Display, ] button, Overview, 5Set the value, Setting overview, Dual Zone System, Select the source

42

2

3

4 Select the seat you want to compensate Press the [4] or [¢] button.

5 Exit Audio Control mode

Press the [MENU] button for at least 1 second.

Function of KDC-X995

Listening Position Fine Adjustments

Making fine adjustment of the value specified at Preset position selection per speaker.

1 Select the source

Pressing the [SRC] button repeatedly switches source.

Select a source other than “STANDBY”.

2 Enter Audio Control mode Press the [VOL] knob.

3 Enter Manual position setting mode Turn the [VOL] knob and press it when the desired item is displayed.

Select “Position” > “DTA”.

4 Select the speaker you want to set Turn the [VOL] knob and press it when the desired value is displayed.

Enter Audio Control mode Press the [VOL] knob.

Enter Preset position setting mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “Position” > “Preset Position”.

1 Select the source

Pressing the [SRC] button repeatedly switches source.

Select a source other than “STANDBY”.

Audio Adjustments

Listening Position Selection

The sound environment can be compensated in accordance with the selected position. According to the listening position, select the position from the following settings.

Display	Compensation seat
“ALL”	Not compensating.
“Front-Left”	Front-Left seat
“Front-Right”	Front-Right seat
“Front”	Front seat

( : Factory setting)

Item	Setting overview
“FRONT” / “L”	Front Left speaker
“FRONT” / “R”	Front Right speaker
“REAR” / “L”	Rear Left speaker
“REAR” / “R”	Rear Right speaker
“SUBWOOFER” / “L”	Subwoofer Left
“SUBWOOFER” / “R”	Subwoofer Right
“INITIAL”	Initialize the setting values.

5Set the value

Press the [4] or [¢] button. Adjust between 0 and 5.58 feet.

Press the [VOL] knob for at least 1 second if you want to execute the “INITIAL”.

6Exit Audio Control mode

Press the [MENU] button for at least 1 second.

Dual Zone System

Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.

Display		Overview
“2Zone Rear Volume”*1		Adjust the volume of Rear channel.
		“0” — “35”
“Detailed Setup”
	“2Zone”	Sets the Dual Zone System.
		“OFF”/ “ON”
	“2Zone Select”*1	Specifies the destination of sub source sound
		when the Dual Zone function is turned on.
		“Rear”/ “Front”
*1 The Dual Zone System is set to “ON”.
		(	: Factory setting)

1Select the source

Pressing the [SRC] button repeatedly switches source.

Select a source other than “STANDBY”.

2Enter Audio Control mode Press the [VOL] knob.

3Turn the [VOL] knob and press it when the desired item is displayed.

Select “Detailed Setup”.

4Select the item you want to set

Turn the [VOL] knob and press it when the desired item is displayed.

5Exit Audio Control mode

Press the [MENU] button for at least 1 second.

⁄

•Select Main source by [SRC] button.

•Adjust the volume of Front channel by [VOL] knob.

KDC-X995/ KDC-BT948HD