Manuals / Brands / Car Audio and Video / Car Stereo System / Kenwood / Car Audio and Video / Car Stereo System

Kenwood BT948HD, KDC-X995 Removing the hard rubber frame, CAUTION, ¤CAUTION, Japanese cars, non-Japanesecars, Removing the Unit

1 76

Download 76 pages, 5.42 Mb

English

Removing the hard rubber frame

1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure.

Lock

Catch

Accessory2 Removal tool

2 When the upper level is removed, remove the lower two locations.

⁄

• The frame can be removed from the bottom side in the same manner.

Removing the Unit

1 Refer to the section <Removing the hard rubber frame> and then remove the hard rubber frame.

2 Detach the faceplate.

3 Insert the two removal tools deeply into the slots on each side, as shown.

4 Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside.

Accessory2

¤

• Be careful to avoid injury from the catch pins on the removal tool.

5 Pull the unit all the way out with your hands, being careful not to drop it.

Installation/Removing the Unit

non-Japanese cars

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

⁄

•Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).

Japanese cars

1Refer to the section <Removing the hard rubber frame> and then remove the hard rubber frame.

2Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws.

T		N
N	T	T/N
N	T

T: Toyota cars

N: Nissan cars

		8 mm	8mm
		MAX.	8mm
		MAX.	MAX.
	3		MAX.
	3		4
			4
ø5mm			ø5mm

Accessory3...for Nissan car

Accessory4...for Toyota car

¤CAUTION

Install this unit in the console of your vehicle.

Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot.

69

Contents

For your records US Residents Only www.Kenwoodusa.com Before use Component names and functions General operation iPod/iPhone Operation PANDORA® Operation Audio Adjustments DSP Setup Bluetooth Setup SMS (Short Message Service) Basic Operations of remote control 2WARNING To prevent injury or fire, take the following precautions: Do not use this unit before canceling Demonstration mode How to reset your unit Cleaning the Unit Handling CDs 1Release button 2[MENU] button 3[DISP] button 4[VOL] knob 5[SEARCH MODE] button Menu List Operation Select the source Pressing the [SRC] button repeatedly switches source Enter Menu List mode Press the [MENU] button Select the setting item SRC MENU VOL DISP SCRL Playing iPod • Connect an iPod •Select iPod source 2Enter Play Mode Menu Press the [VOL] knob for at least 1 second 3Select the Play Mode Turn the [VOL] knob Overview Remarks Selecting the Search mode Normal playing Browsing 2Enter Search mode Press the [SEARCH MODE] button Related Search 1Play the music in iPod 3Enter Related Search mode Select “Related Search” Searches music 3Press the [SEARCH MODE] button 4Enter Skip Search mode Select “Skip Search” 5Search for item Cancelling the Skip Search 2Enter Delete Playlist mode Select “Delete My Playlist” Select ”Delete One” or ”Delete All” 4Turn the [VOL] knob and press it when the desired item is displayed Select the song you want to delete Listening to PANDORA® • Connect an iPhone •Select Pandora source Thumbs up Press the [DISP] button for at least 1 second 4Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly Search and New Station Registration Select “New Stations” 4Select the character to be searched for SEARCH MODE Playing USB device • Connect a USB device •Select USB source Moving to the next folder ¡!2 ¡" ¡# 2Enter Play Mode 5Exit Play Mode USB Setting 3Enter Skip Search mode 4Search for music 1Enter Direct Music Search mode Press the [DIRECT] button on the remote control 2Enter the music number Release MENU VOL DISP SRC 4 38 ¢ SCRL Drop open the faceplate Press the Release button Disc play Music CD source Audio file source Disc changer source (Optional) Basic Operation of Disc Changer (Optional) Select CD changer source Direct Disc Search 1Enter Direct Disc Search mode 2Enter the disc number 3Search the disc Press the [FM] or [AM] button SRC MENU VOL Selecting HD Radio source Selecting the Receiving Band 2.Turn the [VOL] knob and press it when the desired item is displayed Select “FM” or “AM” 1Select the radio band Select “List & Memory” > Preset number HD Radio™ Setting 1Select the HD Radio source 4Select the setting item to adjust iTunes Tagging [SEARCH MODE] 1Saves song’s information Page Getting Started Receiving a Call Answering a Phone Call Rejecting an Incoming Call Press the [] or [SRC] button Answering the Waiting Call after Terminating the Current Call Switching between the Current Call and Waiting Call Other Functions Clearing the Disconnection Message Press the [] button Calling a Number in the Phone Book 2Select the Phone Book mode Select “Phonebook” 3Select the character to be searched for 4 Select the name Make a Voice Dialing Call 2Select voice recognition mode Select “Voice Recognize” 3“PB Name?” is displayed 4“PN Type” is displayed 4¢ SCRL Switching display Press the [DISP] button Mode Display Type Page Customization of 5-lineDisplay Mode &3-lineDisplay Mode & iPod-likeDisplay Mode source Enter Menu List mode iPod-likedisplay mode Customization of Spectrum Analyzer Display Mode Spectrum analyzer display mode display mode 6 Exit Menu List mode and then press it again briefly Customization of Clock Display Mode 3Enter Display Setting mode and Select the Clock Display Illumination Color Selection Select “Settings” >“DISP & ILLUMI” >“Color Select” 3Select the place where you want to set the Illumination Color Auxiliary Input Display Setting 1Select the AUX source Select “Settings” >“AUX Name Set” 4Select the Auxiliary input display Turn the [VOL] knob Release MENU VOL MENU VOL SRC 4 ¢ Clock & Date display type setting Select “Settings” > “Clock & Date” Date Adjustment Select “Settings” > “Clock & Date” > “Date Adjust” 3Adjusting Date 1.Turn the [VOL] knob to adjust the month 3.Turn the [VOL] knob to adjust the day Initial Settings Demonstration mode Setting Theft Deterrent Faceplate Removing the Faceplate 2Drawing the faceplate to left side pull it to forward and remove it Reattaching the Faceplate 3Align the shaft on the unit with the depression on the faceplate Audio Control 2Enter Audio Control mode Press the [VOL] knob 3Select the setting item to adjust 5Exit Audio Control mode Preset Equalizer curve Select Equalizer curve 3Enter Preset Equalizer mode Select “Equalizer” >“Preset Equalizer” 2.Select the iPod Equalizer curve Listening Position Fine Adjustments Page Car Type Selection 3Enter Cabin select mode Select “Detailed Setup” > “Car Type” 4Select the car type Press the [VOL] button Car Type Fine Adjustments 3Enter Car Type Adjustment mode Select “Detailed Setup” >“Car Type Adjust” X’Over Setting 3Enter X’Over setting mode Select “Detailed Setup” >“X’Over” 4Select the speaker you want to set Select “Front”, “Rear”, or “SubWoofer” Audio Preset Recall 2Enter Audio preset recall mode Select “Detailed Setup” >“Preset” >“Recall” Select preset number Easy pairing function When registering a cell-phonefor the first time, registering a cell-phone 5Transmit the PIN code Press the [VOL] knob 2“(cell-phonename)” or “Device Full” is displayed 3Select a cell-phonename Turn the [VOL] knob 5Exit BT Settings mode Press the [] button Registering Bluetooth device Registering from this unit Select “BT Settings” > “Pairing” >“Device Regist.” 3Select a Bluetooth device 7Exit BT Settings mode Press the [] button Registering PIN Code 2Enter PIN code edit mode Select “BT Settings” > “Detailed Setup” >“PIN Code Edit” 3Input the PIN code Selecting the Bluetooth device You Wish to Connect Deleting a Registered Bluetooth device Select “BT Settings” > “Pairing” >“Device Delete” 3Select the Bluetooth device Turn the [VOL] knob 4Delete the selected Bluetooth device Press the [VOL] knob Downloading the Phone Book Select “PB Name Regist” (Regist) 5Press the [VOL] knob 6Register a voice tag (first) 7Confirm the voice tag (second) “Enter Voice 2” is displayed Select “PB Name Check” (Play) MENU VOL DISP TEL Downloading the SMS 2Enter SMS download mode Select “BT Settings” >“SMS Download” Page Satellite Radio Setting Selecting Satellite Radio source Selecting the channel Selecting the Preset Band 1Select Satellite Radio source Preset Memory 1Select the channel you wish to store in the preset memory Channel Scan 3Enter Channel Scan Select “Channel Scan” General control In HD Radio source In USB/Music CD/Audio file source In iPod source In Pandora source Changing the battery of the remote control unit ¤CAUTION About Audio file iPod/iPhone that can be connected to this unit About PANDORA® internet radio About USB device About “KENWOOD Music Editor” About the Cell-Phone About Satellite Radio tuner (Optional) Menu List Function items appearing when the Music CD/ Audio file source is selected Function items appearing when the HD Radio™ tuner source is selected Function items appearing when an AUX source is selected Function items appearing when the Hands-Freesource is selected Function items appearing when the Satellite Radio tuner source is selected City list Page 2CAUTION FCC WARNING FCC NOTE IC (Industry Canada) Notice CALIFORNIA, USA For Good Reception Page Removing the hard rubber frame Installation the Microphone Unit General Tuner source Disc source Audio file source Hands-free The messages shown below display your systems condition SIRIUS/ XM/ HD Radio Reception Bluetooth Pandora FM tuner section Digital FM tuner section AM tuner section Digital AM tuner section Bluetooth section Audio section Auxiliary input