Select “PB Name Regist” (Regist)5Press the [VOL] knob.6Register a voice tag (first)

“Enter Voice 1” is displayed.

When a beep is heard, say a voice tag within 2 seconds.

7Confirm the voice tag (second) “Enter Voice 2” is displayed.

When a beep is heard, say the same voice tag as that you said in step 6 within 2 seconds. “Completed” is displayed.

8End registration Press the [VOL] knob.

Return to step 3. You can register another voice tag continuously.

⁄

•If your voice cannot be recognized, a message is displayed. Pressing the [VOL] knob allows you to retry voice input. Refer to <Troubleshooting Guide> (page 72).

Select “PB Name Check” (Play)

5Press the [VOL] knob.

Play the registered voice and return to step 3.

Select “PB Name Delete” (Delete)

5Delete a voice tag Press the [VOL] knob.

6Turn the [VOL] knob to select “YES”, and then press the [VOL] knob.Exit BT Settings mode

Press the [] button.

⁄

• Audio sound is not output during voice tag registration.

Setting a Voice Command for Category

Add a voice tag to the phone number category (type) for voice calling.

1Enter Bluetooth mode

Press the [] button.

✍✍You can also select from “Settings” in Menu List mode.

2Enter Phone Number type edit mode Turn the [VOL] knob and press it when the desired item is displayed.

Select “BT Settings” > “Voice Tag” > “PN Type Edit”.

3Select the category (type) you wish to set Turn the [VOL] knob and press it when the desired item is displayed.

Select “General”, “Home”, “Office”, “Mobile”, or “Other”

4Select a mode

Turn the [VOL] knob.

Display

Operation

“PN Type Regist”

Register a voice tag.

*Displayed only when a name for which a voice tag has been registered is selected.

5Register the category (type) by performing steps 5 to 8 in <Adding a Voice Dialing Command> (page 52).

6Exit BT Settings mode Press the [] button.

⁄

•Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phone book may not be recalled by voice command.

English 53