Kenwood BT948HD, KDC-X995 Item, Range, Display, Speaker, Overview, Operation, SRC MENU VOL, Set the value, 5Set the value, Operation type, Speaker Setting, Select the source

DSP Setup

SRC MENU VOL

4 ¢

Car Type Selection

You can compensate the delay of the sound arrival time by selecting your environment from the following car types.

Display	Overview
“OFF”	Not compensating.
“Compact”	Compact car
“Full size car”	Full size car
“Wagon”	Station wagon
“Minivan”	Minivan
“SUV”	Sport-utility vehicle
“Minivan (Long)”	Long Minivan

( : Factory setting)

1Select the source

Pressing the [SRC] button repeatedly switches source.

Select a source other than “STANDBY”.

2Enter Audio Control mode Press the [VOL] knob.

3Enter Cabin select mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “Detailed Setup” > “Car Type”.4Select the car type

Press the [4] or [¢] button.

5Set the value

Press the [VOL] button.

6Exit Audio Control mode

Press the [MENU] button for at least 1 second.

⁄

•You can compensate the distances in more details by using <Car Type Fine Adjustments> (page 45) function.

44KDC-X995/ KDC-BT948HD

Speaker Setting

The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items.

Speaker	Item	Range
“FRONT”	“SIZE”	Speaker Size Front
		KDC-X995:
		“O.E.M.”, “4inch”, “5inch”, “6 1/2inch”,
		“6 3/4inch”, “7inch”, “4x6”, “5x7”, “6x8”,
		“6x9”, “7x10”
		KDC-BT948HD:
		“Small”, “Medium”, “Large”
	“LOCATION”	Speaker Location Front
		“Door”, “On Dash”, “Under Dash”
	“TWEETER”	Speaker Size Tweeter
		“None”, “Use”
“REAR”	“SIZE”	Speaker Size Rear
		KDC-X995:
		“None”, “O.E.M.”, “4inch”, “5inch”,
		“6 1/2inch”, “6 3/4inch”, “7inch”, “4x6”,
		“5x7”, “6x8”, “6x9”, “7x10”
		KDC-BT948HD:
		“None”, “Small”, “Medium”, “Large”
	“LOCATION”	Speaker Location Rear
		• “Door”, “Rear Deck”
		• “2nd Row”, “3rd Row” (Car Type:
		“Minivan”, “Minivan (Long)”)
“SUB W”	“SIZE”	Speaker Size Subwoofer
		KDC-X995:
		“None”, “6 1/2inch”, “8inch”, “10inch”,
		“12inch”, “15inch Over”
		KDC-BT948HD:
		“None”, “Small”, “Large”
		(	: Factory setting)

1Select the source

Pressing the [SRC] button repeatedly switches source.

Select a source other than “STANDBY”.

2Enter Audio Control mode Press the [VOL] knob.

3Enter Speaker setting mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “Detailed Setup” > “Speaker”.

4Select the item you want to set

Operation type	Operation
Selects the item.	Turn the [VOL] knob.
Adjust each item.	Press the [4] or [¢] button.
Set the value.	Press the [VOL] button.

5Exit Audio Control mode

Press the [MENU] button for at least 1 second.