Speaker setup ("SP SETUP")

This sets up the speakers according to the speaker system in use. Speaker setup is required every time the speaker system is changed.

œSee <Getting into the setup mode> (™) and select "SP SETUP".∑Use [MULTI CONTROL ∞/5] to select the subwoofer setting.
Speaker

Display

Setting

Subwoofer"SUBW ON"With Subwoofer
"SUBW OFF"Without Subwoofer

 

éPress [SETUP].®Repeat steps ∑– éfor the rest of the speaker setting.

Speaker

Display

Setting

Front speaker"FRNT LRG"Large size front speaker
"FRNT NML"Average size front speaker

 

 

"CNTR NML"Average size center speaker

Center speaker

"CNTR LRG"Large size center speaker

 

"CNTR OFF"

No center speaker is connected.

 

"SURR NML"

Average size surround speaker

Surround speaker

"SURR LRG"Large size surround speaker

 

"SURR OFF"

No surround speaker is connected.

 

"BS LRG"

Large size surround back speaker

 

"BS NML"

Average size surround back speaker

Surround Back

"BS OFF"

No surround back speaker is connected.

 

Left and Right Surround Back speakers are

speaker"BS L/R"*1

 

 

connected.

 

"BS MONO"*1

Only one Surround Back speaker is

 

 

connected.

Subwoofer re-

"RMX ON"Subwoofer re-mix is on.
mix*2"RMX OFF"Subwoofer re-mix is off.
*1 This selection is available when either "BS LRG" or "BS NML" is selected.

*2 The function for adding the bass of other channels to the subwoofer channel according to the speaker setup.

†Go to the next setting, "TEST TONE".If you wish to exit the setup mode, see <To exit the setup mode> ™.
•Reference for speaker size

"LRG" : A speaker with a sufficient bass reproduction capability (a speaker with a large woofer or a large cabinet size).

"NML" : A speaker with a lower bass reproduction capability than the "LRG" speakers (the bass frequencies will be output from the speakers set to "LRG" and the subwoofer).

If you cannot identify the size of a speaker, it is recommended to set it to "NML".

•When "SUBW OFF" is selected, the front speakers are automatically set to "FRNT LRG".

•For "FRNT LRG" selection, no sound will be heard from subwoofer even it is set to ON. However, if you select "RMX ON", you will be able to hear sound from the subwoofer.

•When in STEREO mode, the sound goes directly to front speakers.•If "FRNT NML" is selected, "LRG" cannot be selected for the other speakers.•If "CNTR NML" or "CNTR OFF" is selected, "SURR LRG" cannot be selected.•If "SURR OFF" is selected, no surround back speaker can be selected.•"BS LRG" cannot be selected unless "SURR LRG" is selected.

•If "BS MONO" is selected, surround back signal can only be output at the SURROUND BACK L terminal.

English 23