Playback

VOLUME CONTROLINPUT SELECTOR AV AUX VOLUME /o

Input source keys

œSelect the source you want to play.Use the Input source keys on the remote control unit to select a source.Or use [INPUT SELECTOR] knob or [AV AUX] key.∑Start playback from the selected source.éUse [VOLUME %/fi] to adjust the volume.®Enjoy various surround effects.

You can enjoy a variety of listen modes (<Enjoying various surround effects> ª).

The surround effects can be fine tuned according to theselected input source (<Adjustments according to the playing source> ‚).

•The AV AUX cannot be selected with the [INPUT SELECTOR] knob of this unit. This input should be selected using the [AV AUX] on this unit or the [AV AUX] key on the remote control unit.

Monitoring the input source in the original sound (STRAIGHT DECODE)

The signal input from a source can be output directly without any sound field effect added to it.

STRAIGHT DECODE

œSelect the source you want to play.

∑Start playback from the selected source.

éPress [STRAIGHT DECODE].

STRAIGT DECODE indicator lights up.

When STRAIGHT DECODE is enabled, the listen mode is selected automatically according to the input signal. (<Enjoying various surround effects> ª).

To cancelPress [STRAIGHT DECODE] again.STRAIGHT DECODE is also canceled when the listen mode is changed.

•When the input mode is "6CH INPT", the listen mode does not change. (<Selecting the input mode> §)

•If the input signal uses a number of channels larger than the number of speakers in use, the signals are distributed automatically according to the available speakers.

English 27