Speaker setup (Detailed Setup)

Speaker setup flow

The detailed settings below allow you to enjoy full performance of the receiver according to the environment of your listening room.

Speaker settings consist of 6 elements.Speaker Setup ("SP SETUP") £Select whether each speaker channel is used or, if used, its size.The Easy Setup function also allows you to make speaker settings easier.See <Speaker setup (Easy Setup)> ¡Test Tone ("TEST TONE") ¢Select the output level from each speaker.Distance ("DISTANCE") ¢Select the distance between each speaker and the listening position.Crossover ("CROSS OVER") ∞

Set the lower limit of the bass frequencies reproduced from the speakers set to "NML" in the <Speaker Setup>. The frequencies below the frequency set here are distributed to other speakers (those set to "LRG" and the subwoofer).

Low Frequency Effects Level ("LFE LVL") ∞Select the level of bass audio enhancement.

Low Frequency Effect channel delivers separate non-directional bass signals to the subwoofer for more dynamic deep bass sound effects.

Audio Delay (Lip Sync) ("AUDIO DELAY") ∞Adjust the deviation in time between the video and audio.Speaker settings completed!

Getting into the setup mode

The setup procedure is identical for all of the setting elements. Once you remember the following procedure, you can easily set up other setting elements.

SETUP

MULTI CONTROL

O/

œPress [SETUP] to enter the setup mode.∑Use [MULTI CONTROL ∞/5] to select the element to setup.
DisplaySetting
"SP SETUP"Speaker setup
"TEST TONE"Test tone
"DISTANCE"Distance

"CROSS OVER"

Crossover
"LFE LVL"Low frequency effects level

"AUDIO DELAY"

Audio delay
"EXIT"Exit the setup mode.
éPress [SETUP] to get into the setup mode of the selected element.®Perform setup by referring to the page describing the selected item.To exit the setup modeSelect "EXIT" in the step ∑and press [SETUP].

•The [SETUP] key and [MULTI CONTROL] knob on the front panel can also be used to select the item in the setup mode.

22 KRF-V6300D