Kenwood KRF-V6300D Crossover ("CROSS OVER"), Low frequency effects level ("LFE LVL"), Audio Delay (Lip Sync) ("AUDIO DELAY"), Press [SETUP], Press [SETUP], Press [SETUP]

Crossover ("CROSS OVER")

The crossover frequency is the lower limit of the bass frequencies reproduced from the speakers set to "NML" in the <Speaker Setup>. The frequencies below the set crossover frequency

are output from other speakers (those set to "LRG" and the subwoofer).œSee <Getting into the setup mode> (™) and select "CROSS OVER".∑Use [MULTI CONTROL ∞/5] to select crossover frequency.The frequency is selected from 40, 60, 80, 100, 120, 150 and 200Hz.

éPress [SETUP].

®Go to the next setting, "LFE LVL".

If you wish to exit the setup mode, see <To exit the setup mode> ™.

Low frequency effects level ("LFE LVL")

Low frequency effect signal is used exclusively for giving the field effect of bass tone in the Dolby Digital and DTS signal.

œSee <Getting into the setup mode> (™) and select "LFE LVL".∑Use [MULTI CONTROL ∞/5] to adjust the low frequency effect level.The level is adjusted from 0dB to -10dB in 1dB step decrements.

éPress [SETUP].

®Go to the next setting, "AUDIO DELAY".

If you wish to exit the setup mode, see <To exit the setup mode> ™.

Audio Delay (Lip Sync) ("AUDIO DELAY")

If the monitored video is delayed in time with respect to the audio from the speakers, the audio output timing can be delayed.

œSee <Getting into the setup mode> (™) and select "AUDIO DELAY".∑Use [MULTI CONTROL ∞/5] to adjust the delay time.The delay time is adjusted from 0ms to 300ms in 10ms step.

éPress [SETUP].

The setup is complete when the "EXIT" indication appears.®Press [SETUP] to exit the setup mode.

English 25