Adjusting the sound

Adjustment according to the playing source

The audio can be adjusted as desired according to the source being played.SPEAKERS A/B/OFFMULTI CONTROL SOUND SOUND

MULTI CONTROL

O/

∑Use the [MULTI CONTROL ∞/5] to adjust the setting as desired.For detailed adjustment method, see the explanation of each item.To exit the sound adjustment modePress [SOUND].

Speaker level adjustment

The output level from the desired speaker channels can be fine adjusted according to the properties of each disc.

The adjustment is only temporary for the current input selection. The value will return automatically to the original setup value when the power is turned on/off or when the input selection is changed.

œPress [SOUND] repeatedly until the speaker to be adjusted ("C", "RS", "RB", "BS", LB", "LS", or "SW") appears on the display.

∑Use the [MULTI CONTROL ∞/5] to adjust the level.éRepeat steps 1 and 2 to adjust the level of other speakers.
œPress [SOUND] until the desired item appears on the display.

Each time you press the key, the menu changes as follows. Note that some items are not displayed depending on speaker settings and listen mode.

Display

Adjustment

Range

 

"C"

Center speaker level

-10 – +10dB

 

"RS"

Surround right speaker level

-10 – +10dB

 

"RB"*

Surround Back right speaker level

-10 – +10dB

 

"BS"*

Surround Back speaker level

-10 – +10dB

*1

"LB"*

Surround Back left speaker level

-10 – +10dB

 

"LS"

Surround left speaker level

-10 – +10dB

 

"SW"

Subwoofer level

-10 – +10dB

 

"INPUT"Input level-6, -3, 0

*2

"NIGHT"Midnight mode

"ON", "OFF"

*3

"PANORAMA"

Panorama mode

"ON", "OFF"

 

"DIMENSION"Dimension

 

*4

"CENTER WIDTH"

Center width

 

 

Input source name

Exit the adjustment mode.

 

 

*"RB" and "LB" can be selected when "BS L/R" is selected in the speaker setup. "BS" can be selected when "BS MONO" is selected in the speaker setup.

*1 The adjustment is only temporary for the current input selection. The value will return automatically to the original setup value when the power is turned on/off or when the input selection is changed.

*2 Analog mode only*3 Dolby Digital and DTS mode only*4 Pro Logic II Music mode and Pro Logic IIx Music mode only

Input level adjustment

Analog source only

If the input level of an analog source signal is too high, the CLIP indicator will blink to indicate. Adjust the input level.

œPress [SOUND] repeatedly until "INPUT" appears on the display.

∑Use the [MULTI CONTROL ∞/5] to adjust the level.

40 KRF-V6300D