Kenwood KRF-V6300D Special features, Notes on instructions, Tone, •DTS-ES, Example:, direction, Adjusting, main unit, explained, •DTS Neo:6, •DTS 96/24, in a table, The operating

Special features

HDMI ™(High-Definition Multimedia Interface) terminal !Making HDMI connection let you enjoy high quality video such as Blu-ray discs.

Audio signals came in at Audio IN termianl are interlocked with Video signals output at the HDMI MONITOR OUT terminal.

High-quality music playback in Pure Audio Mode

•

This function reproduces music signals in high quality with high fidelity to original sound.

In this mode, the display and the analog video circuitry are turned off to eliminate their effects on the audio circuitry. In addition, the optimum listen mode is selected according to the input music signal.

True home theater sound ª

This unit incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround mode according to your equipment or the software you are going to play and enjoy!

•Dolby Digital•Dolby Digital EX•Dolby Pro Logic II

•Dolby Pro Logic IIx

•DTS Digital Surround•DTS-ES•DTS Neo:6•DTS 96/24Easy Setup of the speaker ¡

The speaker settings can be completed by simply selecting the room type and the listening position. The audio will be corrected automatically according to the characteristics of the speaker system in use.

Crossover Frequency Adjustment ∞

The bass frequency from the subwoofer and the other speakers can be adjusted making better sound phase between speakers and natural sound field.

Notes on instructions

The operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When the same operation is also available on the main unit, the operating method is indicated in illustrations.

The [VOLUME CONTROL], [MULTI CONTROL] and [INPUT SELECTOR] knobs on the main unit are operated by turning the knobs clockwise or counterclockwise.

Example:

		The knob on the main
		unit is pointed with an
		arrow to indicate that it
		can be turned in either
		direction.
MULTI CONTROL ACTIVE EQ
	ACTIVE EQ
	BASS BOOST
	TONE
	MULTI CONTROL
	O/
		The operating
		procedures refer to
		those of the remote
		control unit. Some
		operations are also
Adjusting	Tone	available using the
		key (or knob) of the
¶ Operation	only on the remote control unit.
		same name on the
The tone level	be adjusted when the input signal is a PCM or
analog signal		main unit.
	the listen mode of this unit is set to "Stereo".

œPress [TONE] to select the Tone mode.

∑ Use [MULTI CONTROL ∞/5] to select "TONE ON" or
	Options to be
"TONE OFF".
	selected are listed
	in a table.

éWhen in "TONE ON" selection, press [TONE] for the following displays.

Display	Setting	Range
"BASS"	Adjusts low frequency range.	-10 – +10 (in 2 step)
"TREB"	Adjusts high frequency range.	-10 – +10 (in 2 step)

®Use [MULTI CONTROL ∞/5] to adjust the sound quality.

Audio Delay function (Lip Sync)∞This function corrects deviation between the video and audio.

† Press [TONE].	Further notes, tips
	and operating
	restrictions are

•When the ACTIVE EQ mode is set to ON, set it to OFF and thenexplained. control the TONE setting.

•The illustrations of the main unit display panel and the examples of operations are shown for the purpose of explanation and may differ from the actual view or operation.

English 5