•Depending on the type of the signal or speaker setting, some listen modes cannot be selected.

•When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital.

•To enjoy Dolby Digital surround (as well as all the other listen modes) from a single component, be sure to use a Dolby Digital compatible source component.

•Dolby Digital or DTS signal having more channels than the maximum number of playback channels available using this unit’s current settings is input, downmixing is performed to match the number of available channels.

•Some Dolby Digital Surround EX compliant discs do not contain identification signals. For this reason, the receiver may not detect these discs as Dolby Digital EX when the input mode is set to "F- AUTO". In this case, set the listen mode to "DOLBY DIGITAL EX".

DVD 6-channel analog input

Surround play is possible if you use a DVD player with 6- (5.1-) channel output.

INPUT SELECTOR

INPUT MODE

DVD/6CH

Preparations

•Connect your DVD player to the DVD/6CH INPUT jacks of this unit.•Turn on all other components that will be used.•Complete <Speaker setup>.œSelect "DVD/6CH" as the input source.∑Press [INPUT MODE] to select "6CH INPT".éStart playback of a DVD disc.

•It is not possible to adjust the speaker level or sound effect of the channels separately when this unit is in the 6CH INPUT mode. ([SETUP], [SOUND], [LISTEN MODE], [ACTIVE EQ] and [TONE] will not be functional.) Adjust the speaker level with the controls

of the DVD player. Refer to the Instruction manual of the DVD players for the detailed operating instructions.

English 33