RDS Auto Memory

This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function.

AUTO MEMORY BANDTUNER

œUse [TUNER] to select the tuner.

Use [BAND] to set the broadcast band to "FM".éPress [AUTO MEMORY].

Presetting radio stations manually

The RDS auto memory function assigns preset numbers to RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations.

See <RDS Auto Memory>.MEMORY

MULTI CONTROL

O/

œTune to the station you want to store.Press [MEMORY] while receiving the station.

After a few minutes, up to 40 RDS stations are preset in order from channel "01".

Stations already stored in the preset memory may be replaced by RDS stations. (i.e., If the RDS AUTO MEMORY function detects 15 RDS stations, the stations currently preset at numbers 01–15 will be replaced by the RDS stations.)

Proceed to step é within 20 seconds.(If more than 20 seconds elapse, press [MEMORY] again.)éUse [MULTI CONTROL /5] to select one of the station presets (1 – 40).®Press [MEMORY] again to confirm the setting.Repeat steps œ, ∑, é, and ® to store as many stations as necessary.

If you store a station at a previously used preset, the previous station will be replaced by the new one.

English 35