4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
2Connect the transceiver’s DC power connector to
the connector on the DC power cable.
•Press the connectors firmly together until the locking
tab clicks.
Note:
◆
For your transceiver to fully exhibit its performance capabilities,
the following optional power supply is recommended:
PS-33 (20.5 A, 25% duty cycle).
◆
Before connecting the DC power supply to the transceiver, be
sure to switch the transceiver and the DC power supply OFF.
◆
Do not plug the DC power supply into an AC outlet until you
make all connections.
■Fixed Station Operation
In order to use this transceiver for fixed station
operation, you will need a separate 13.8 V DC power
supply that must be purchased separately. The
recommended current capacity of your power supply
is 12 A.
1Connect the DC power cable to the regulated DC
power supply and check that polarities are correct
(Red: positive, Black: negative).
•DO NOT directly connect the transceiver to an AC
outlet!
•Use the supplied DC power cable to connect the
transceiver to a regulated power supply.
•Do not substitute a cable with smaller gauge wires.
Fuse holder
Black (–)
Red (+)
To AC outlet
Regulated DC power
supply
Fuse holder
Press
firmly.