49
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
STORING DTMF NUMBERS FOR AUTOMATIC DIALER
To store a DTMF number with a maximum of 16 digits in
any of 10 dedicated DTMF memory channels, follow the
procedure below.
Note:
Audible DTMF tones from other transceivers near you may be
picked up by your microphone. If so, this could prevent the function from
working correctly.
1Press [MNU] to enter Menu mode.
2Select Menu No. 29 to 38 (DTMF) corresponding to
the desired memory channel .
3Press
[OK]
.
•The display for entering a DTMF number appears.
4Use the keypad to enter the digits of the number to
be stored.
•The corresponding DTMF tones are heard.
•If you enter an incorrect digit, press [VFO] to erase all
digits entered.
5Press
[OK]
to complete the entry and exit Menu
mode.
CONFIRMING STORED DTMF NUMBERS
1Press [MNU] to enter Menu mode.
2Select Menu No. 29 to 38 (DTMF) corresponding to
the desired memory channel.
3Press [MR].
•The number stored in the channel scrolls across the
display accompanied by DTMF tones from the speaker.
4Press [MNU] to exit Menu mode.
TRANSMITTING STORED DTMF NUMBERS
To transmit a stored DTMF number, follow the procedure
below.
1Press Mic [PTT]+ Mic [PF].
2Press a single key [0] to [9] to select the desired
channel.
•The number stored in the channel scrolls across the
display accompanied by DTMF tones from the speaker.
•After the transmission, the frequency display is restored.