36
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
STORING DATA IN PM CHANNELS
1Confirm that the following conditions have been
satisfied:
•The transceiver is in the receive mode.
•Scan is not being used.
•Microphone Control is OFF.
2Select the desired band.
3Select the desired frequency and related data (Tone,
CTCSS, etc.) using VFO mode.
4If required, select another band, then select the
desired frequency and related data.
5Press
[F]
, [PM].
•The PM channel numbers appear and blink.
6Press
[1]
to
[4]
corresponding to the desired PM
channel.
•The selected frequency and related data are stored in
the PM channel.
RECALLING PM CHANNELS
1Press [PM].
•The PM channel numbers appear.
2Press
[1]
to
[4]
corresponding to the desired PM
channel.
•The contents of the selected channel are recalled.
•The selected channel number appears and slowly
blinks.
•To exit PM Recall mode, press [PM],
[PM OFF]
.
Note:
You cannot recall a PM memory channel while transmitting.
1
2