58
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
S-METER SQUELCH
By activating S-meter Squelch, the squelch does not
open until a signal with the same or greater strength
than the S-meter setting is received. This function is
useful to eliminate constantly resetting the squelch when
receiving weak stations that you have no interest in.
1Press [MNU] to enter Menu mode.
2Select Menu No. 14 (S.SQL).
3Press
[OK]
, then turn the Tuning control to switch the
function ON (or OFF).
4Press
[OK]
again to complete the setting and exit
Menu mode.
•The S-meter setting segments appear.
5Turn the SQL control to select the desired S-meter
setting from the 7 levels.
■Squelch Hang Time
When using S-meter Squelch, you may want to adjust
the time interval between when the received signals
drop and when the squelch closes.
1Press [MNU] to enter Menu mode.
2Select Menu No. 15 (HNG.T).
3Press
[OK]
, then turn the Tuning control to select
from OFF (default), 125 ms, 250 ms and 500 ms.
4Press
[OK]
again to complete the setting and exit
Menu mode.
Note:
Menu No. 15 is selectable only when the S-meter Squelch is
ON.