59
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
ADVANCED INTERCEPT POINT (AIP)AIP helps eliminate interference and reduce audio
distortion caused by intermodulation. This problem is
often apparent in urban areas when the band is
extremely crowded.
1Select the desired band.
2Press
[F]
, [DIM] to switch the function ON (or OFF).
•“AIP” appears when the function is selected.
Note:
You can make a separate AIP setting between the VHF and UHF
bands.
SWITCHING AM/FM MODE (U.S.A./ CANADA ONLY)This transceiver is also capable of receiving in AM mode.
The default mode for the 118 MHz band is AM; the
default for the 144 MHz or 440 MHz band is FM. You
can select either mode for each band.
Note:
The AM mode is available to receive only. You cannot use AM
mode to transmit.
1Select the desired band.
2Press [MNU] to enter Menu mode.
3Select Menu No. 0 (F/A).
4Press
[OK]
, then select FM or AM mode.
5Press
[OK]
once again to complete the setting and
exit Menu mode.
When you select AM mode, a spade icon appears.
1
2