32
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
MEMORY ➡ VFO TRANSFERS
Transferring the contents of a memory channel or the
Call channel to the VFO can be useful if you want to
search for other stations or a clear frequency, near the
selected memory channel or Call channel frequency.
1Recall the desired memory channel or the Call
channel.
2Press
[F]
, [VFO].
•The entire contents of the memory channel or the Call
channel are copied to the VFO. VFO mode is selected
after the transfer is completed.
Note:
◆
A transmit frequency from an odd-split memory channel or odd-split
Call channel is not transferred to the VFO. To transfer a transmit
frequency, press
[REV]
, then press
[F]
,
[VFO]
.
◆
Lockout status and memory names are not copied from a memory
channel to the VFO.
CHANNEL DISPLAY FUNCTION
When this function is switched ON, the transceiver
displays only a memory channel number instead of a
frequency.
Press

[LOW]

+[ ] to switch this function ON (or OFF).
When in Channel Display mode, you cannot use the
following functions:
•VFO Select
•Programmable Memory
Recall
•Memory Channel Store
•Memory ➞ VFO Transfer
•Freq. Step Size Change
•Easy Operation Select
•Programmable Memory
Reset
•MHz Function Select
•Programmable Memory
Store
•Call Channel Store
•Memory Channel Clear
•VFO Scan
•Partial/ Full reset
Note:
◆
You cannot switch this function ON if you have stored frequencies in
no memory channels.
◆
When in Channel Display mode, you may want to recall only memory
channels of the desired band. Before pressing
[LOW]+[ ]
, select
“ONE” in Menu No. 4 (MR), then select the desired band.
1
2