24
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
■Activating Tone Function
1Select the desired band.
2Press
[TONE]
to activate the Tone function.
•Each time you press
[TONE]
, the selection changes
as shown below.
TM-G707E Only:
When you access repeaters that require 1750 Hz
tones, you need not activate the Tone function. No matter which
selection you make here, pressing the Mic PF key assigned the
1750 Hz Tone function {page 51}
causes the transceiver to transmit
1750 Hz tones.
■Selecting a Tone Frequency
1Select the desired band.
2Press
[TONE]
to activate the Tone function.
3Press
[F]
,
[T.SEL]
.
•The current tone frequency appears and blinks. The
default is 88.5 Hz.
4Turn the Tuning control, or press Mic
[UP]/ [DWN], to select a tone frequency.
5Press
[OK]
to complete the setting.
TM-G707E Only:
To transmit a 1750 Hz tone, assign the 1750 Hz
Tone function to one of the Programmable Function (PF) keys of the
microphone {page 51}.
Note:
If you store tone settings in memory channels, you need not
make the settings every time. Recalling the memory channels will
restore the tone settings which you make this time. Refer to
“MEMORY CHANNELS” {page 27}.
U.S.A./ Canada Only:
Use Nos. 01 to 38 shown in the table above
when selecting tone frequencies via Keypad Direct Entry {page 55}.
1 2
No Indicator CTCSS(“CT”)Tone(“T”).oN .qerF
)zH( .oN .qerF
)zH( .oN .qerF
)zH( .oN .qerF
)zH(
100.76114.79125.631138.291
209.17210.001223.141235.302
304.47315.301322.641337.012
400.77412.701424.151431.812
507.97519.011527.651537.522
605.28618.411622.261636.332
704.58718.811729.761738.142
805.88810.321828.371833.052
905.19913.721929.971
018.49028.131032.681