23(5$725&219(1,(1&(6
|
| Status | Announcement |
Press [A/B (A=B)] + |
| ||
[ |
| ], then turn the |
|
|
| ||
|
| ||
MULTI/CH control | “VFO reset?” | ||
Reset confirmation |
| ||
during VFO reset2 |
| ||
Press [A/B (A=B)] + |
| ||
[ |
| ], then turn the |
|
|
| ||
MULTI/CH control | “Full reset?” | ||
Reset confirmation |
| ||
during Full reset2 |
| ||
1Announced when operating in
2Announced even when the auto Voice announcement is OFF.
3When auto Voice announcement is ON, various configuration images appear on the display. When modifications are made to these settings, the new setting is announced.
VOICE2:
•Pressing [PF] will announce the current state of the S meter/ RF meter.
•During a voice announcement, pressing [PF] will cancel the announcement.
VOICE2 Announcements
|
| S meter |
| PWR meter | |
|
|
|
| ||
Dot | Announcement | Dot | Announcement | ||
position | position | ||||
|
|
|
|
|
|
| 0 | S 0 |
| 0 | P 0 |
|
|
|
|
|
|
1 | ~ 3 | S 1 | 1 | ~ 3 | P 5 |
|
|
|
|
|
|
4 | ~ 5 | S 2 | 4 | ~ 6 | P 10 |
|
|
|
|
| |
| 6 | S 3 | 7 ~ 12 | P 25 | |
|
|
|
|
|
|
7 | ~ 8 | S 4 | 13 | ~ 18 | P 50 |
|
|
|
|
|
|
| 9 | S 5 | 19 | ~ 23 | P 75 |
|
|
|
|
|
|
10 | ~ 11 | S 6 | 24 | ~ 30 | P 100 |
|
|
|
|
|
|
| 12 | S 7 |
|
|
|
|
|
|
|
|
|
13 | ~ 14 | S 8 |
|
|
|
|
|
|
|
|
|
| 15 | S 9 |
|
|
|
|
|
|
|
|
|
16 | ~ 19 | 10 dB |
|
|
|
|
|
|
|
|
|
| 20 | 20 dB |
|
|
|
|
|
|
|
|
|
21 | ~ 24 | 30 dB |
|
|
|
|
|
|
|
|
|
| 25 | 40 dB |
|
|
|
|
|
|
|
|
|
26 | ~ 29 | 50 dB |
|
|
|
|
|
|
|
|
|
| 30 | 60 dB |
|
|
|
|
|
|
|
|
|
VOICE3:
•Pressing [PF] will announce the current state of the SWR meter/ ALC meter/ COMP meter.
•During a voice announcement, pressing [PF] will cancel the announcement.
VOICE3 Announcements
| SWR meter | ALC meter | ||
|
|
|
| |
Dot | Announcement | Dot | Announcement | |
position | position | |||
|
|
|
|
|
| 1 | R 1.0 | 0 | A 0 |
|
|
|
|
|
2 | ~ 6 | R 1.5 | 1 | A 1 |
|
|
|
| |
7 ~ 11 | R 2.0 | 2 | A 2 | |
|
|
|
|
|
12 | ~ 16 | R 3.0 | ~ | ~ |
|
|
|
|
|
17 | ~ 24 | R 5.0 | 13 | A 13 |
|
|
|
|
|
25 | ~ 30 | R OVER | 14 | A 14 |
|
|
|
|
|
|
|
| 15 ~ | A OVER |
COMP meter
Dot
Announcement
position
0C 0 dB
1 ~ 10 | C 10 dB |
11 ~ 20 | C 20 dB |
|
|
21 ~ 30 | C OVER |
Q 9RLFH*XLGH$QQRXQFHPHQW9ROXPH
Turning the AF control does not change the volume for the Voice Guide announcement. To change the announcement volume , access Menu No. 06 and select the volume level from “1” to “7” or “oFF”.
Q 9RLFH*XLGH$QQRXQFHPHQW6SHHG
If you feel the Voice Announcement speed is too slow or too fast, you can adjust the Voice Announcement speed. Five different speeds can be configured. Access Menu No. 07 and select “0” to “4”, where 0 is the slowest speed and 4 is the fastest. The default speed is 1.
Q 9RLFH*XLGH$QQRXQFHPHQW/DQJXDJH
If you mistakenly change the announcement language, you can change it back to English by accessing Menu No. 08 and selecting “EN”.
(0(5*(1&<&$// .7<3(21/<
Section 97.401(d) of the regulations governing amateur radio in the United States permit emergency amateur communications on 5167.5 kHz by stations in or within 92.6 km of the state of Alaska. This frequency is for use only when the immediate safety of human life and/or property are threatened, and is never to be used for routine communications.
Press [EMERGENCY] to change to the Emergency channel (5167.5 kHz/ USB).
•[EMERGENCY] can be programmed onto a PF key.
•When entering Emergency mode, “EMERGENCY” momentarily appears on the
62
