Kenwood TS-590S instruction manual 203875, 203$7,%/75$16&,95, &211&7,1*35,3+5$/48,3017

&211(&7,1*3(5,3+(5$/(48,30(17

Note: Use a USB/ RS-232C cable shorter than 3 meters.

&20387(5

The USB connector allows you to directly connect a computer by using a USB (AB type) or RS-232 cable. By connecting a USB cable to the PC, you can enable the input and output of the transmission and reception of sound. You must use the ARUA-10 software to control the USB audio system line of the PC, available at:

http://www.kenwood.com/i/products/info/amateur/software_download.html

Note:

XThe USB cable and RS-232C cable are not included; purchase them separately.

XConnect the USB cable directly to the PC.

XIn theory, a delay occurs in the USB audio system. Therefore, sound may be clipped when using a PC in this system. Use this USB audio system in cases where you are recording communications that do not require quick responses to a PC.

TS-590S

To RS-232C serial port

(f)

To USB port

(f)

RS-232C straight

cable

Personal computer

USB cable

&203$7,%/(75$16&(,9(5

When transferring data to or from another TS-590S, TS-480HX/SAT, TS-2000/X, TS-570S/D, or TS-870S, directly connect the 2 transceivers using the COM connectors.

TS-590S Compatible transceiver

(f)	(f) DB-9 connector wiring (Cross-wired)
	RS-232C cross cable

67