Kenwood TS-590S instruction manual 5266%$153$75, 3$&.7&/8675781, &211&7,1*35,3+5$/48,3017

&211(&7,1*3(5,3+(5$/(48,30(17

';3$&.(7&/867(5781(

If you have a TH-D72A/E/ TM-D710A/E/ RC-D710/ TM-D700A/E, you can connect the TH-D72A/E/ TM-D710A/E/ RC-D710/ TM-D700A/E to the TS-590S transceiver to use the DX PacketCluster Tune function. Connect the 2 transceivers with a cross-wired RS-232C cable as shown below. (For connecting to the TH-D72A/E, refer to the TH-D72A/E instruction manual.)

RS-232C cross cable

TS-590S

TM-D710A/E/

RC-D710 + TM-V71A/E

(m)

(f) TM-D700A/E

(f)

RC-D710 + PG-5J

(f)

PG-5G

&5266%$1'5(3($7(5

If you have a Kenwood FM transceiver (K type) with a 6 pin mini DIN connector, you can connect the FM transceiver to the TS-590S transceiver to use the Crossband repeater function. Connect the 2 transceivers with a DIN (13-pin)/ mini DIN cable (6-pin) as shown below.

DIN (13-pin)/ Mini DIN (6-pin)

TS-590S

TM-D710A/ TM-V71A TM-D700A

DIN (13-pin) pulg	Mini DIN (6-pin) pulg
PKS
ANI	PR1
	SQC
ANO	PKD
PSQ	PKS

After connecting the 2 transceivers with the cable, access Menu Nos. 73 (PKS polarity) and 74 (Busy lockout) on the TS-590S transceiver and select “on”. You will further need to adjust the audio input/ output level of the TS- 590S transceiver using Menu Nos. 66 and 67.

70