Chapter 6 Internet Connection
56
Resulting interface configuration
When you finish set-up in Traffic Policy Wizard, the resulting configuration can be viewed
under Configuration →Interfaces and edited if desirable.
Figure6.3 Configurationof interfaces — connection by a single leased link
The Internet Interfaces groups includes only card Internet selected in the third page of the
wizard. Other interfaces (including Dial-In) are considered as segments of the LAN and put in
Trusted / Local interfaces.
Ifthe setting does notmirror the real configuration of the network correctly (for instance there
is an interface planned for DMZ), you can move the particular interface to Other Interfaces.
For these interfaces, it will be necessary to define corresponding traffic rules manually (see
chapter 7.3).
It is also possible to add new interfaces to the Internet Interfaces group. Packets will then be
routed to corresponding target networks in accordance with the system routing table (see also
chapter 18.1) and IP address translation will be applied (NAT). However, such configuration is
not significantly helpful in place.
Warning
Itis necessary that in the Single internet Link mode the default gateway is set only at the “main”
Internet interface! If WinRoute detects more default gateways, error is announced. Solve this
problem immediately, otherwise traffic from the firewall and the LAN to the Internet will not
work correctly.