23.2 Configuration of VPN clients
289
Figure23.6 VPNserver settings — server port and routes for VPN clients
Custom Routes
Other networks to which a VPN route will be set for the client can be specified in this
section. By default, routes to all local subnets at the VPN server’s side are defined — see
chapter 23.4).
Hint
Use the 255.255.255.255 network mask to define a route to a certain host. This can be
helpful for example when a route to a host in the demilitarized zone at the VPN server’s
side is being added.
23.2 Configurationof VPN clients
The following conditions must be met to enable connection of remote clients to local networks
via encrypted channels:
•The Kerio VPN Client must be installed at remote clients (for detailed description, refer
to a stand-alone document, Kerio VPN Client — User Guide).
•Users whose accounts are used for authentication to Kerio VPN Client must possess
rights enabling them connect to the VPN server in WinRoute (see chapter 15.115.1).
•Connection to the VPN server from the Internet as well as communication between
VPN clients must be allowed by traffic rules.