19
To remove shelves from the shipping position (shelves
are shipped upside down):
1. Grasp front of upper shelf with one hand and use other
hand to remove packing material from shelf area.
2. Lower front of upper shelf until shelf hooks can be
removed from slots in shelf supports on the back
refrigerator wall. Pull shelf forward to remove.
3. Flip shelf over.
4. Insert rear shelf hooks into slots in shelf supports.
5. Tilt front of shelf up until rear hooks drop into slots.
6. Lower front of shelf. Check to make sure that shelf is
securely in position.

Slide-out shelves (on some models)

Some shelves slide out, providing easier access to foods
stored in back.
To slide out shelf, carefully pull front of shelf toward
you.
To slide in shelf, push shelf in until it stops.
To remove a shelf from the metal frame:
1. Pull shelf out to the stop.
2. Tilt front of the shelf up and pull it out a little further.
3. Lift up shelf so that it moves through the slot in the
frame.
Replace the shelf in the reverse order.

Shelves and shelf frames

To remove a shelf/frame:
1. Tilt up front of the shelf/frame.
2. Pull shelf/frame.
To replace a shelf/frame:
1. Guide the rear shelf hooks into the slots in the shelf
supports on the back refrigerator wall.
2. Tilt up front of shelf/frame.
3. Lower the front of the shelf into position.
Deli Drawer
(on some models)
The deli drawer provides a convenient place to store
raisins, nuts, spreads, and other small items at normal
refrigerator temperatures.
To remove the deli drawer:
1. Slide the deli drawer straight out to the stop.
2. Lift the front and slide the drawer out the rest of the
way.
Replace the deli drawer by sliding it back in fully past
the drawer stop.
Convertible V egetable/Meat Drawer and Cover
To remove the drawer:
1. Slide the drawer straight out to the stop.
2. Lift the front slightly and slide it out the rest of the way.
3. Replace the drawer by sliding it past the drawer stop.
To remove the cover:
1. Remove the drawer and the crisper.
2. Lift the front of the cover off of the supports and
remove it by pulling up and out.
To replace the cover:
1. Fit the back of the cover into the notch supports on the
walls of the refrigerator and lower it into place.
2. Replace the drawer and crisper.
LOWLOW
HIGH