KitchenAid W10354195B, KEMS309B, KEMS379B manual Clock, Tones, Tools, Fahrenheit and Celsius, Timer

Clock

This is a 12-hour clock. Before setting, make sure the oven, Timer, and Timed Cooking are off.

To Set:

1.Touch CLOCK SET.

2.Touch the number keypads to set the time of day.

3.Touch CLOCK SET or START.

Tones

Tones are audible signals, indicating the following:

One beep

■Valid keypad touch

■Function has been entered

One chime

■Oven is preheated

■Preheat cycle has been completed

Three beeps

■Invalid keypad touch

Three chimes

■End of a cooking cycle

Four chimes

■When timer reaches zero

Includes using the Kitchen Timer for functions other than cooking.

Tone Volume

The volume is preset at low, but can be changed to high.

To Change: Touch TOOLS and then “3” to toggle volume between high and low settings.

All Tones

All tones are preset on, but can be turned off.

To Turn Off/On: Touch TOOLS and then “2” to toggle tones between On and Off settings.

NOTE: The Kitchen Timer is not affected by reminder tones.

End-of-Cycle and Reminder Tones

The Timed Cooking end-of-cycle and reminder tones are preset on, but can be turned off. If all tones have been turned off, the end-of-cycle and reminder tones cannot be independently turned on.

To Turn Tones Off/On: Touch TOOLS and then “4” to toggle tones between On and Off settings.

NOTE: The Kitchen Timer is not affected by these reminder tones.

Tools

(Microwave Oven Models)

The Tools selection keypad allows access to 7 hidden functions within the Electronic Oven Control. These hidden functions allow you to change the oven temperature between Fahrenheit and Celsius, turn the audible signals on and off, prompts, turn the turntable on and off, select the language, and select demo modes.

NOTE: This procedure is for dedicated microwave ovens only. Tools for combination ovens will appear on the oven display.

To Use:

1.Touch TOOLS. The oven display will scroll through the various options, starting at 1 and ending automatically at 7.

You can also touch the Tools keypad repeatedly to manually scroll through the list of options.

2.Touch the number keypad for the specific option to toggle the function setup. Use the following chart as a guide.

TOOLS CHART

TOOLS	HIDDEN FUNCTION
1	Fahrenheit and Celsius conversion
2	Sound On/Off
3	Sound High/Low
4	End tone On/Off
5	Turntable On/Off
6	Language
7	Demo mode

Fahrenheit and Celsius

The temperature is preset in Fahrenheit; however it can be changed to Celsius.

To Change: Touch OPTIONS and then “1” to toggle temperature between Fahrenheit and Celsius settings.

When the temperature is in Fahrenheit, “°F” follows the oven temperature.

When the temperature is in Celsius, “°C” follows the oven temperature.

Timer

The Timer can be set in minutes and seconds or hours and minutes and counts down the set time.

NOTE: The Timer does not start or stop the oven.

To Set:

1.Touch SET/START.

Touch again to switch between MIN/SEC and HR/MIN.

If no action is taken, the control will continue to wait for a length of time to be entered.

2.Touch the number keypads to set the length of time.

3.Touch SET/START.

If the keypad is not touched, the control will continue to wait for SET/START to be touched.

When the set time ends, 4 chimes will continuously repeat until the Timer Off keypad is touched.

If the Cancel keypad is touched, the oven will turn off; however, the Timer can only be turned off using the Timer Off keypad.

9