Display(s)
When power is first supplied to the oven, the timer display will flash “12:00,” and
CANCEL.
Lower Oven Display (combination oven models)
When the lower oven is in use, this display shows the oven temperature, heat source(s) and start time. In addition, during Timed Cooking, this display shows a time countdown and the stop time (if entered).
If “Err” appears on the lower oven display, an error condition has occurred. Call for service. See the “Assistance or Service” section.
When the lower oven is not in use, this display shows the time of day or Time countdown.
Upper Microwave Oven Display (combination oven models)
When the upper oven is in use, this display shows the upper oven heat source(s), cooking power, quantities, weights and/or help prompts and time countdown.
If “Err” appears on the upper oven display, an error condition has occurred. Call for service. See the “Assistance or Service” section.
When the upper oven is not in use, this display is blank.
Microwave Oven Display (single oven models)
When the microwave oven is in use, the display shows the heat source(s), cooking power, quantities, weight and/or help prompts and time countdown.
If “Err” appears on the display, an error condition has occurred. Call for service. See the “Assistance or Service” section.
Time of Day/Timer Display
When the microwave oven is not in use, the display shows the time of day or time countdown.
Number Codes
The oven is preset with shortcut number codes. A number code includes one or more of the following; food category, cooking power, cook time and food quantity or weight. See the code charts in the “Reheating,” “Defrosting,” “Steam,” “Soften/Melt,” and “EasyConvect™” sections for additional information.
Start/Add 1 Minute
The Start/Add 1 Min keypad controls 3 separate functions for the single
Start
The Start/Add 1 Min keypad begins any upper or single oven cooking function once enough data has been entered and the door is closed.
After enough data has been entered and the door is closed, “Start?” will appear on the oven display as a reminder. If the Start keypad is not touched within 5 minutes after touching another keypad, the oven display will return to the inactive mode and the programmed function will be canceled.
If cooking is interrupted by opening the door, touching Start/Add 1 Min after the door is closed again will resume the preset cycle.
Add 1 Minute
Touching Start/Add 1 Min when the microwave oven is off will start 1 minute of cook time at 100% power. Touching Start/Add 1 Min while the microwave oven is operating will add cook time to the current cycle by 1 minute. Multiple minutes can be added by repeatedly touching Start/Add 1 Min.
Control Lock
The Control Lock shuts down the control panel keypads to avoid unintended use of the oven. The Control Lock will remain set after a power failure, if set before the power failure occurs.
When the control is locked, only the Set/Start, Oven Light, and Timer Off keypads will function.
The Control Lock is preset unlocked, but can be locked.
To Lock Control: Touch and hold START (on combination ovens only) or Start/Add 1 Min (on microwave ovens only) for approximately 3 seconds, until “Control Locked” appears on the lower text line and a lock icon appears in the display.
To Unlock Control: Repeat to unlock. “Control Unlocked” appears on the lower text line and the lock icon will be removed.
Microwave Oven Cancel
The Cancel keypad stops any microwave oven function except for the Clock, Timer and Control Lock.
The oven will also turn off when the door is opened. When the door is opened, the element(s) and fan will turn off, but the oven light will remain on. Close the door and touch START to resume the preset cycle (except for sensor cooking).
The oven cooling fan may continue to operate even after an oven function has been canceled or completed, depending on the oven temperature.
8
