KitchenAid KGRI801 manual Troubleshooting, To Replace, Nothing will operate, Oven will not operate

Models: KGRI801

1 56
Download 56 pages 63.17 Kb
Page 24
Image 24
TROUBLESHOOTING

4.Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from the oven door frame.

To Replace:

1.Insert both hanger arms into the door.

2.Open the oven door.

You should hear a “click” as the door is set into place.

3.Move the hinge levers back to the locked position. Ensure that the door is free to open and close. If it is not, repeat the removal and installation procedures.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

Is the power supply cord unplugged? Plug into a grounded outlet.

Has a household fuse blown or has a circuit breaker tripped?

Replace the fuse or reset the circuit.

Is the range properly connected to the gas supply? Contact a trained repair specialist or see Installation Instructions.

Surface burner makes popping noises

Is the burner wet? Let it dry.

Burner sparks but does not light

Is there continuous sparking, but the burner does not light?

Discontinue use of the surface burner and contact a service technician.

Surface burners will not operate

Is this the first time the surface burners have been used? Turn on any one of the surface burner knobs to release air from the gas lines.

Is the control knob set correctly? Push in knob before turning to a setting.

Are the burner ports clogged? See “Surface Burners” section.

Surface burner flames are uneven, yellow and/or noisy

Are the burner ports clogged? See “Surface Burners” section.

On models with caps, are the burner caps positioned properly?

See “Surface Burners” section.

Is the burner damaged?

On models with caps, look for a warped cap. If cap will not spin freely on a flat surface, painted side down, the cap is warped. Switch cap with a different surface burner to check for further warping. Contact a trained repair specialist.

Is propane gas being used?

The appliance may have been converted improperly. Contact a trained repair specialist.

Excessive heat around cookware on cooktop

Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ½" (1.25 cm) outside the cooking area.

Cooktop cooking results not what expected

Is the proper cookware being used? See “Cookware” section.

Is the control knob set to the proper heat level? See “Cooktop Controls” section.

Is the appliance level?

Level the appliance. See the Installation Instructions.

Oven will not operate

Is this the first time the oven has been used?

Turn any one of the surface burner knobs on to release air from the gas lines.

Is the electronic oven control set correctly? See “Electronic Oven Control” section.

24

Page 24
Image 24
KitchenAid KGRI801 manual Troubleshooting, To Replace, Nothing will operate, Surface burner makes popping noises