Chapter 3: Front Panel

Item Description

Illustration

5NETWORK section This section shows the status of the network module connection, as follows:

Constantly illuminated green with red extinguished = cable/fibre is synchronised, but there is no audio activity.

Pulsating green with red extinguished = cable/fibre is on with audio activity.

Green extinguished with red illuminated = cable/fibre are off.

6ASYNCHRONOUS SAMPLE RATE CONVERTER section (DN9652 only) This section shows the status of the configured clock source, which can be ASRC or network output. Each source has a yellow ENABLED LED, which illuminates to show that the source is enabled. The DN9652 also has the facility to stop the output clock if the input clock fails. This condition is indicated by the illumination of the red STOPPED LED.

For the LED status, see Table 2 “DN9652 ASRC LED status” on page 13.

7LCD display This backlit, alphanumeric display has two rows of 16 digits. During boot up the display shows the unit’s current

IP address and subnet mask for about five seconds and then the user-configured text thereafter.

8

Klark Teknik roundel Has a blue backlight,

 

which illuminates to show that power is on.

9

Cut-outThere are four cut-outs for rack

N/A

 

mount fixings.

 

 

 

 

 

DN9650/DN9652 Network Bridge

12

Operator Manual

Page 26
Image 26
Klark Teknik DN9652, DN 9650 specifications Front Panel, Klark Teknik roundel Has a blue backlight