Klark Teknik DN9652, DN 9650 Clocking options, To change the clocking options of a network module

Chapter 5: Configuring the DN965X

2In the Change XXX Module Settings window, choose the desired options. For example, select the sample frequency as 96kHz and the clock source as MADI Clock (Slave) for a Lab X MADIX MADI module.

3Click OK.

>>To change the settings of a Klark Teknik 3-Port AES50 Module card (DN9650 only)

The 3-port AES50 module card is configured in the same way as a network module card (see “To configure a network module card” on page 19).

Clocking options

The Change Clocking Options window lets you set parameters such as enabling the ASRC, selecting the word clock output source, setting the VBB format, etc.

>> To change the clocking options of a network module

1In the Clocking Options section of the configuration window, click Change

Clocking Options.

2In the Change Clocking Options window (example shows a Lab X MADIX MADI Module card), choose the desired options.

3Click OK.

	DN9650/DN9652 Network Bridge
20	Operator Manual