A-61070 September 1999 A-3
For example, perform the following steps to change the image address
from 1201.01.020.005 to 1201.02.000.000.
• Press Next or enter function code F97. The cursor will appear over
the first fixed field character (1201.01.020.005).
• Press + (plus key) to leave the image address field (1201)
unchanged.
• Enter .02.000.000.
• Press Enter to exit, saving the changes to the image address and
return to a normal operating display.
Using Function Code F92
Function code F92 allows you to set or change the image address fixed
field.
The number of characters in the image address fixed field is defined
during installation for each mode. Using F92, you will not be allowed to
enter more than the predefined number of characters.
The fixed field of the image address will be displayed. An entry cursor
will appear over the first character of the fixed field.
To enter numeric characters, input the desired value using the numeric
keys (0 to 9) on the keyboard and press Enter to input the value.
To enter alpha characters, enter the alpha entry mode by pressing
either the Up or Down arrow key. A portion of the alpha character set
will be displayed with a flashing cursor appearing over one of the
characters. If the desired alpha character does not appear in the
display, press either the Up or Down arrow key to display another
portion of the alphabet.
The alpha character set is composed of: uppercase English characters
(A-Z), a space ( ), seven special characters ($ * - : < > +), “a” dieresis
(ä), beta (ß), “n” tilde (ñ), “o” dieresis (ö), and “u” dieresis (ü).
NOTE: The plus sign cannot be input as the first character in the fixed
field.
Once the desired alpha character appears in the display, it may be
selected for input into the fixed field. To input the desired alpha
character, use the Left or Right arrow key to move the flashing cursor
over the desired alpha character. Press Enter to place the alpha
character into the fixed field.
Repeat the above process to enter each fixed field character.