A-61070 September 1999 5-11
4. Lift up and lat ch t he horizontal transport plate into its open position.
NOTE: If the Patch Reader accessory is installed, it m ust be
removed from the mounting plate in order to lift up the
horizontal transport plate.
5. Vacuum the lower belt module and transport belts.
WARNING:
Do not make contact with any electrical
components when vacuuming inside the scanner.
6. Release and lower the horizontal transpor t plat e back into its
original position.
7. Lower the release bar and latch t he f ront scan module into its
original position.
8. Close the lower access door.