5-2 A-61070 September 1999
Daily maintenance
procedures Maintenance procedures that should be performed daily include
cleaning the imaging guides, feed and separator rollers and the paper
path.

Cleaning the imaging

guides To clean the imaging guides, follow the steps below:
IMPORTANT:

Do not use any abrasive materials when cleaning the

imaging guides. This includes abrasive cleansers,

commercial solvents, paper towels, or coarse cloths.

1. Open the side access door.
2. Release and open the vertical transport plate by rotating the release
handle 180° clockwise.
3. Release and remove the front imaging guide by rotating the
thumbscrew 90° counterclockwise, and lifting the guide’s two green
saddle mounts from the mounting shaft.
Front imaging guide
Thumbscrew
Rear imaging guide
Magnets