Kodak 5500 - page 66

7-2 A-61070 September 1999

Trouble Probable Cause Remedy

Repeated jamming. The transport system plates

and operator-accessible areas

are not firmly closed.

Repeat any recent jam clearing or

maintenance procedures, making

certain all plates are firmly in

place and all operator-accessible

areas are closed. Refer to

“Clearing the document path” later

in this chapter.

Documents are skewed during

feeding. Adjust guides and feed roller.

Any imaging problem or

distortion (especially after

clearing a paper jam)

Pieces of paper may be caught

in the imaging area of the

transport.

Check and clean imaging and

transport areas for lodged pieces

of paper. Refer to Chapter 5,

“Cleaning the imaging guides”.

Clear streak on scanned

images. There may be a foreign object

in the optical path. Check and clean imaging guides

and transport area. Refer to

Chapter 5, “Cleaning the imaging

guides”.

Overall scanned image

density too light, too dark, or

uneven.

Dust, dirt or fingerprints on the

imaging guides. Check and clean im ag ing guides.

Refer to Chapter 5, “Cleaning the

imaging guides”.

Calibration is not performed or

is not performed correctly. Perform calibration using

instructions provided. Refer to

Chapter 2, “Calibrating the

scanner”.

Lamps are dirty or not properly

installed. Check the lamps for proper

installation. Check for dirt or

debris in the lamp housing. Refer

to Chapter 5, “Cleaning the

exposure lamp housings”.

Calibration failure. Calibration target was skewed

when feeding. Retry. Adjust feed tray side

guides. Adjust feed and separator

roller gap.

Document was in the transport

at the time of calibration. Remove any documents in the

transport system. Retry. Refer to

“Clearing the document path” later

in this chapter.

Lamps are dirty or not properly

installed. Check the lamps for proper

installation. Check for dirt or

debris in the lamp housing. Refer

to Chapter 5, “Cleaning the

exposure lamp housings”.

Contents

Main Page Page 1 Introduction Scanner features Scanner options Scanner components For European units only: Control panel Status display Operating keys and indicators Operating keys and indicators Confirmation tone/alarm 2 Getting Started Turning on the scanner Enabled Selecting the language display Calibrating the scanner Unsuccessful calibration Preparing documents for scanning Document orientation Document sizes Adjusting the feed and separator roller gap feeder) Page Page Page Adjusting the exit hopper side guides and end stop Page 3 Operating the Scanner Overview Getting Starte d Setting image levels Selecting a mode Mode Setup Software. Temporary operating values Function Codes, Feeding documents using the semi- automatic feeder Feeding documents manually Feeding thick documents Feeding documents using the automatic feeder 4 Function Codes Using function codes Function code summary Page Function code listing Page Page Page 5 Maintenance Cleaning tasks Cleaning materials Do not use any unauthorized commercial cleaning solvent in any of the cleaning procedures. Replacement parts Daily maintenance procedures Cleaning the imaging guides Page Page Page Page Cleaning the feeder module and separator roller (automatic feeder) Page Cleaning the paper path Page Page Page Cleaning the cabinet Replacement procedures Changing the lamps Make sure the lamps are cool before attempting to remove them from the lamp socket holder. Page Page Replacing the imaging guides Page Page Replacing the feeder module and separator roller Page Page 6 Operator Messages Never power down the machine without first contacting your system administrator. Description/Action Required Getting Started Operating the Scanner Controlled power- down sequence Operator message listing Page Page Page Page Page Page 7 Troubleshooting Trouble and remedy chart Page Clearing the document path The document path Clearing documents The feeder area Page Page Page Page Document exit and upper turn roller areas Removing non-jammed documents 8 Accessories Kodak Digital Science Supplies Parts and tools Using the Bar Code Reader Bar Code Made Easy Bar code types Bar code placement Bar Code Made Easy Before you begin Page Performing a bar code test Using the Evaluate option Page Page Page Page Please Wait Not Found Evaluating test results reflectance F A dimensional Page Bar Code Made Easy, Using the Display option Page Using the Read Rate option Doc Count Using the Footswitch Enabling the confirmation tone Footswitch Pressed actions Footswitch Released actions Using the Patch Reader Patch types current next Patch code placement Kodak Imagelink Printing patches Patch Reading function codes Changing the horizontal read position Cleaning the Patch Reader Do not remove the cable tie from the Patch Reader Using the Document Printer 5000/7000 Printed information 8-28 A-61070 September 1999 Front and rear Document Printer overviews Front Document Printer Cartridge Rear Document Printer Cartridge Front and Rear Document Printer Mounting Plate Views Front Document Printer Mounting Plate View from rear of scanner Vertical start print position Horizontal print position Page Function codes Using the Print Test function Cleaning the ink cartridge Ink deposits or spills can occur if you are not careful during the priming procedure. Front Document Printer Page Page Page Page Replacing the ink cartridge Replacing the front Document Printer ink cartridge Page Replacing the rear Document Printer ink cartridge Appendix A Basic Concepts Modes Image addresses Assigning an image address Using the Next key Using Function Code F92 Image address formats Indexing schemes Single level indexing Two level indexing Two level offset indexing Three level indexing Three level offset indexing Controlling document level changes