A-61070 September 1999 5-1
5 Maintenance
This chapter provides maintenance procedures for the scanner
including cleaning and part replacement procedures.
Cleaning tasks To keep your scanner in good operating condition, the following tasks
must be performed periodically:
• Cleaning the imaging guides (daily)
• Cleaning the feed and separator roller (semi-automatic feeder)
(daily)
• Cleaning the feeder module and separator roller (automatic feeder)
(daily)
• Cleaning the paper path (daily)
• Vacuuming inside the scanner (weekly)
• Cleaning the cabinet (weekly)
For additional maintenance and feeder adjustment information, see
Kodak publication A-61603. Feeder and Maintenance Adjustment
Procedures.
Cleaning materials Materials needed to perform all maintenance procedures are:
• A mild cleaning agent
• A soft, clean, lint-free cloth
• A soft-bristled cleaning brush
• A vacuum cleaner
• Staticide Wipes
• Paper Path Cleaner
IMPORTANT:

Do not use any unauthorized commercial cleaning

solvent in any of the cleaning procedures.

Replacement parts Consumable parts that can be replaced by the customer include:
• Imaging guides
• Exposure lamps
• Automatic Document Feeder Module
• Automatic Document Feeder Separator Roller
Instructions on how to replace these parts are included later in this
chapter.