A-61070 September 1999 7-5
The feeder area To clear the feeder area (Area A):
1. Turn off the power switch.
2. Lift up the lower access door.
CAUTION: Open and close the doors slowly.
3. Raise the f r ont scan m odule.
4. Rotate the feed roller cover release lever downward while rotating
the feed roller cover up to expose the feed roller and separator
roller.
5. Press and hold the gap release lever and remove all jammed
documents.
6. Rotate the feed roller cover to its original position.
7. Lower and latch the front scan module.
8. Close the lower access door.