5-20 A-61070 September 1999
Replacing the feedermodule and separatorroller
To replace the feeder module and separator roller, follow the steps
below:
Replacing the feeder module:
1. Open the front cover.
2. Push the roller cover release lever toward the back of the machine.
3. Grasp and rotate the roller cover toward the back of the machine,
exposing the feeder module and separator roller.
4. Remove the feeder module by pushing it to the right and lift ing it out
of its position.
5. Reinsert a new feeder module, by aligning the pins and fitting it into
position.
Roller cover
release lever
Roller cover
Feeder
module